Digital IP Cores
and Subsystems

Our family of microcontroller and microprocessor related cores includes capable and competitive 32-bit BA22s and the best-available set of proven 8051s.

32-bit Processors
BA2x Family Overview

Secure Processors
Geon - Secure Execution

Application Processors
BA25 Adv. App. Processor
BA22 Basic App. Processor

Cache-Enabled Embedded
BA22 Cache-Embedded

Embedded Processors
BA22 Deeply Embedded
BA21 Low Power
BA20 PipelineZero

Processor-Based AMBA® Subsystems
Family Overview
AHB Low-Power
AHB Performance/Low-Power
AXI Custom Performance

AMBA Bus Infrastructure Cores
See Peripherals Cores >

Efficiently compress media or data with these high-performance hardware codecs. See the video and image compression Family Page for a media compression overview.

 H.264 Video Decoders
Low Latency Constrained
  Baseline Profile

Low-Power Constrained
  Baseline Profile

 H.265 HEVC Decoders
Main Profile

Companion Cores
Image Processing
WDR/HDR
CAMFE Camera Processor
Network Stacks
40G UDPIP Stack
1G/10G UDPIP Stack
• Hardware RTP Stack
  – for H.264 Encoders
  – for H.264 Decoders
  – for JPEG Encoders
IEEE 802.1Qav & 802.1Qbv
   Stack

• MPEG Transport Stream
  Mux

JPEG Still & Motion
Encoders
Baseline
Extended
Ultra-Fast
Decoders
Baseline
Extended
Ultra-fast

JPEG-LS
Lossless & Near-Lossless
Encoder
Decoder

Lossless Data Compression
GZIP Compressor
GUNZIP Decompressor
GZIP Reference Designs
    • for Intel FPGAs
    • for Xiinx FPGAs

Easily integrate memories, peripherals, and hardware networking stacks into SoCs.

Display Controllers
TFT LCD

Device Controllers
smart card reader

Flash Controllers
Parallel Flash
Parallel Flash for AHB
Universal Serial NOR/NAND
   Flash for AHB

Quickly complete the standard parts of your SoC with these memory and peripheral controllers, interfaces, and interconnect cores.

Automotive Buses
CAN

CAN 2.0/FD controller
CAN FD Reference Design
CAN Bus VIP
Automotive Ethernet
TSN Ethernet Subsystem
CAN-to-TSN Gateway
LIN
LIN Bus Master/Slave
LIN Bus VIP
SENT/SAE J2716
Tx/Rx Controller

Avionics/DO-254 Buses
MIL-STD 1553
ARINC 429

SPI
Octal/Quad/Dual/Single SPI
XIP & DMA for AHB
XIP for AHB
Quad SPI
XIP & DMA for AHB
XIP for AHB
XIP for AXI
Master/Slave
Single SPI
Master/Slave
Bridges
SPI to AHB-Lite

I2C & SMBUS
Master/Slave Controller
I2C
Master  • Slave

These encryption cores make it easy to build security into a variety of systems.

GEON SoC Security
GEON Security
    Platform

Encryption Primitives
AES
AES, Programmable
  CCM, GCM, XTS
Key Expander
DES
Single, Triple

Hash Functions
SHA
SHA-3 (Keccak)
SHA-256
SHA-1
MD5
MD5

by CAST, Inc.

Related Links

Recent news summary page

Download this release (PDF).

Visit Product Datasheet page:

  • CAN-CTRL CAN 2.0 & CAN FD Bus Controller Core
  • CANFD-RD CAN 2.0 & CAN FD Reference Design

News CAN Bus Design IP from CAST Now Bundles In Avery Verification IP

WOODCLIFF LAKE, NJ AND TEWKSBURY, MA, November 01 2016

CAST and Avery partner to deliver a ready-to-run IP and VIP package for the CAN Bus.Semiconductor design and verification intellectual property providers CAST, Inc. and Avery Design Systems have partnered to deliver a robust, pre-configured, pre-verified, easy-to-use solution bundle for system developers needing a CAN FD bus controller for automotive and industrial applications.

The new CAN Bus Solution Bundle includes the CAN 2.0 & CAN FD Bus Controller Core from CAST—one of the earliest and most tested such cores available—and the CAN-Xactor VIP from Avery—one of the most comprehensive CAN 2.0 and CAN FD verification suites available—along with a one-month free license to CAN-Xactor.

About the CAN Bus Solution Bundle

VIP for comprehensive, out-of-the-box verification of the CAN bus controller IP coreAvailable now through CAST, the CAN 2.0 and FD bundle with 30-day free VIP license is pre-configured to give system developers an immediate, “out of the box” way to evaluate the CAN IP against all applicable industry specifications. An easy, cost-effective license offered through CAST or Avery then allows developers to conveniently use the same VIP suite to verify the correct operation of the CAN bus as their system development progresses.

The CAN Bus Controller Core in the bundle is developed by Fraunhofer IPMS and licensed and supported by CAST. It was among the first soft IP cores available for ASICs and FPGAs. Running on CAST’s CAN FD Reference Design, it has already undergone the real-world-like testing of three CAN In Automation (CIA) Plug Fests, more than any other core. This includes proven operation with physical transceivers from all popular physical CAN FD transceivers, including those from Denso Automotive, Infineon Technologies, NXP Semiconductors, and On Semiconductor.

“We’ve already licensed this CAN design IP to more than 20 companies this calendar year who have recognized it as the most feature-rich, plug-fest-proven, transceiver-independent CAN FD controller available,” said Nikos Zervas, chief executive officer of CAST. “Now with the respected, world-class VIP from Avery bundled into this solution package, designers can get to work even quicker, confident in the correct operation of this drop-in CAN controller solution.”

The Avery CAN2.0 and FD VIP suite included in the bundle supports the latest ISO specifications including the recent 11898-2 revision. It includes a comprehensive set of models and compliance testsuites for all modes in the specifications. The class-leading VIP is developed in native SystemVerilog UVM, and includes traffic generation, protocol checking, and coverage.

“The CAN FD IP CAST offers is clearly among the best available, and we’re proud to couple our popular verification IP package with it to help designers quickly prove they’re working with a solid, trustworthy CAN controller,” said Chris Browy, vice president of sales and marketing at Avery. “Later that same VIP package can help verify that the CAN network is functioning correctly within even the most complex automotive or industrial systems.”

Availability and Licensing

The new CAN Bus Solution Bundle is available now through CAST. Visit the CAST website (www.cast-inc.com) to learn more, then contact CAST to arrange an evaluation or discuss licensing (info@cast-inc.com, +1 201.391.8300).

To learn more about Avery Design Systems, visit www.avery-design.com, call +1 978. 851.3627, or email sales@avery-design.com.

All trademarks are the property of their respective owners.

 

tw    fbk    li    li    li
Top of Page