Digital IP Cores
and Subsystems

Our family of microcontroller and microprocessor related cores includes capable and competitive 32-bit BA22s and the best-available set of proven 8051s.

32-bit Processors
BA2x Family Overview

Secure Processors
Geon - Secure Execution

Application Processors
BA25 Adv. App. Processor
BA22 Basic App. Processor

Cache-Enabled Embedded
BA22 Cache-Embedded

Embedded Processors
BA22 Deeply Embedded
BA21 Low Power
BA20 PipelineZero

Processor-Based AMBA® Subsystems
Family Overview
AHB Low-Power
AHB Performance/Low-Power
AXI Custom Performance

AMBA Bus Infrastructure Cores
See Peripherals Cores >

Efficiently compress media or data with these high-performance hardware codecs. See the video and image compression Family Page for a media compression overview.

 H.264 Video Decoders
Low Latency Constrained
  Baseline Profile

Low-Power Constrained
  Baseline Profile

 H.265 HEVC Decoders
Main Profile

Companion Cores
Image Processing
WDR/HDR
CAMFE Camera Processor
Network Stacks
40G UDPIP Stack
1G/10G UDPIP Stack
• Hardware RTP Stack
  – for H.264 Encoders
  – for H.264 Decoders
  – for JPEG Encoders
IEEE 802.1Qav & 802.1Qbv
   Stack

• MPEG Transport Stream
  Mux

JPEG Still & Motion
Encoders
Baseline
Extended
Ultra-Fast
Decoders
Baseline
Extended
Ultra-fast

JPEG-LS
Lossless & Near-Lossless
Encoder
Decoder

Lossless Data Compression
GZIP Compressor
GUNZIP Decompressor
GZIP Reference Designs
    • for Intel FPGAs
    • for Xiinx FPGAs

Easily integrate memories, peripherals, and hardware networking stacks into SoCs.

Display Controllers
TFT LCD

Device Controllers
smart card reader

Flash Controllers
Parallel Flash
Parallel Flash for AHB
Universal Serial NOR/NAND
   Flash for AHB

Quickly complete the standard parts of your SoC with these memory and peripheral controllers, interfaces, and interconnect cores.

Automotive Buses
CAN

CAN 2.0/FD controller
CAN FD Reference Design
CAN Bus VIP
Automotive Ethernet
TSN Ethernet Subsystem
CAN-to-TSN Gateway
LIN
LIN Bus Master/Slave
SENT/SAE J2716
Tx/Rx Controller

Avionics/DO-254 Buses
MIL-STD 1553
ARINC 429

SPI
Octal/Quad/Dual/Single SPI
XIP & DMA for AHB
XIP for AHB
Quad SPI
XIP & DMA for AHB
XIP for AHB
XIP for AXI
Master/Slave
Single SPI
Master/Slave
Bridges
SPI to AHB-Lite

I2C & SMBUS
Master/Slave Controller
I2C
Master  • Slave

These encryption cores make it easy to build security into a variety of systems.

GEON SoC Security
GEON Security
    Platform

Encryption Primitives
AES
AES, Programmable
  CCM, GCM, XTS
Key Expander
DES
Single, Triple

Hash Functions
SHA
SHA-3 (Keccak)
SHA-256
SHA-1
MD5
MD5

by CAST, Inc.

Related Links

Recent news summary page

Download this release (PDF).

News CAST and Innovative Semiconductors Combine IP for Integrated USB-OTG Solution

Flexible host/device controller IP core and silicon-proven PHY transceiver macrocell available together in pre-verified configuration

(DAC) San Diego, California, June 07 2004

This core (CUSB2-OTG) has been renamed. The USBHS-OTG-SD cores has been discontinued. Please contact Sales to learn more.

Semiconductor intellectual property (IP) providers CAST, Inc. and Innovative Semiconductors, Inc. today announced a new relationship under which they will deliver a complete, easy-to-use package for physically implementing USB 2.0 On-The-Go (OTG) connections in a variety of electronic products.

The new offering combines the CAST CUSB2-OTG core with the Innovative SL210 USB 2.0 OTG mixed signal PHY hard macro core. This gives designers the functionality of CAST’s host/device controller core and the silicon-proven mixed-signal circuitry of Innovative’s physical layer transceiver together in a tested, ready-to-implement configuration.

The new package is available next month for several ASIC technologies, and includes full documentation and a complete test environment that helps designers verify the functionality and compliance of their OTG implementation. Customers may contact either company for more technical and pricing information.

About USB 2.0 On-The-Go

The CAST/Innovative USB-OTG package fully conforms to the USB Implementer Forum’s 2001 OTG supplement to the USB 2.0 specification.

USB OTG promises to build on the popularity of USB (Universal Serial Bus) by making it even easier to connect digital products. Whereas USB needs a computer host to manage the connection to one or more devices (a master-slave protocol), OTG gives every device enough host capabilities so they can be directly interconnected. Users will be able to, for example, connect their OTG-equipped camera directly to a printer for photos or to a cell phone for Internet sharing, without the use of a computer. (See www.everythingusb.com/usbonthego for more information.)

The CAST CUSB2-OTG IP Core

CAST’s core implements a port that can serve as either a master or a slave when connected to another USB device. Its efficient design features special hardware for the host negotiation protocol (HNP), session request protocol (SRP), and other time-critical functions. Designers can take advantage of the core’s FIFO interfaces, and can program up to 16 IN and OUT endpoints to further optimize the core for their specific application. The CUSB2-OTG core includes a flexible, user-programmable general interface to 8/16/32-bit microprocessors. It communicates with the Innovative PHY through a standard USB Transceiver Macrocell+ (UTMI+) interface.

The Innovative SL210 USB 2.0 OTG PHY Transceiver Core

Innovative’s transceiver core eliminates the challenges of mixed-signal design for USB-OTG by combining an analog front end with a digital back end in a silicon-proven hard macrocell. Using standard digital CMOS technology, the full-featured PHY includes an on-chip oscillator, termination resistor, DP/DM short circuit protection, and on-chip OTG comparators. It supports power down mode, and can handle data line VBUS pulsing session requests. The SL210 builds on Innovative’s portfolio of USB 2.0 certified products, which have been ported to many processes and incorporated in hundreds of customer products.

About Innovative Semiconductors, Inc.

Innovative’s mixed-signal products have gained acceptance among some of the world leaders in the consumer and computer markets. Innovative’s licensees include 3dfx, Agilent, Conexant, Creative Technology, Evans & Sutherland, Honeywell, IBM, Infineon, JPL, LSI Logic, Mitel, Motorola, National Semiconductor, NVIDIA, Oki, S3, Samsung, Siemens, STMicroelectronics, Trident and Tvia. Innovative’s technology has been designed in a variety of applications ranging from PCs, PC peripherals, Internet appliances, and set-top boxes to satellites. The company is a member of the USB-IF, TSMC IP Alliance Program and UMC IP Program. For more information about Innovative, visit www.isi96.com.

About CAST, Inc.

CAST provides about 100 popular and standards-based IP cores for ASICs and FPGAs. Privately owned and operating since 1993 with a focus on making IP practical and affordable, CAST has established a reputation for high-quality IP products, simple licensing, and responsive technical support. The company is headquartered near New York City, has a European office in the UK, and works with an international network of IP developers and distributors.

CAST is a trademark of CAST, Inc.
All other trademarks are the property of their respective owners.

 

tw    fbk    li    li    li
Top of Page